DeWalt DCS380 shoe and boot removal

Geschrieben von: Jonathan Hicks
  • Kommentare: 1
DeWalt DCS380 shoe and boot removal

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

4 Minuten

Einleitung

Disassembly of shoe and boot for later repair of gearbox or blade release lever.

  1. RRLo1dhg2PMMGtIS

    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

    yellow button is lost

    J Hess -

  2. CrgwddNJNa4HqtHH
    CrgwddNJNa4HqtHH
    1RCobgBs4GMSyq3M

    • Remove the two M8x18mm T20 bolts from the front plate.

  3. FnRa4Fm6CqHC1Nxl

    • Pull the front of the grip while holding the saw body in place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jonathan Hicks

Mitglied seit: 17/01/19

752 Reputation

0 Kommentare