GameSir K1 Kaleid Front Panel Replacement

Geschrieben von: Triniti Gutierrez
  • Kommentare: 0
GameSir K1 Kaleid Front Panel Replacement

Schwierigkeitsgrad

Very easy

Schritte

2

Zeitaufwand

3 - 5 Minuten

Einleitung

If you need to disassemble your GameSir K1 Kaleid controller, use this guide to access the interior of the controller.

  1. UeiJqBUkoFuB4UWt

    • Remove seven 1 mm screws from the backside of the controller using a TR6 Torx screwdriver.

    • There may be a screw covered under the manufacturer's sticker.

  2. RHhE4Mg6cBkrGyEI
    RHhE4Mg6cBkrGyEI
    VaXV4ErHEadwOsVE
    OGOYLuVcHyt6ZO5r

    • Hold the controller between your hands, with the front panel facing down.

    • Lift the back panel.

    • It should come up easily. If met with resistance, check for a missed screw on the back panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Triniti Gutierrez

Mitglied seit: 24/01/25

878 Reputation

0 Kommentare