Einleitung

Diese Anleitung zeigt, wie der Akku in der Polar M400 ausgetauscht wird. Der Akku kann durch Tiefentladung oder durch eine Wassertiefe von mehr als 30 m beschädigt sein. Vielleicht ist sie auch nur zu alt.

In der Polar M400 ist ein wiederaufladbarer Akku eingebaut, der mehr als 300 mal geladen werden kann, bevor er an Leistung verliert. Entsorge den alten Akku fachgerecht.

  1. iwAiwJJOG54RaYxt
    • Setze eine normale aufgebogene Büroklammer in die Löcher auf beiden Seiten der Uhr wo das Armband befestigt ist.

    It may be easier to push the pins out in one direction. Unfortunately, I do not recall which direction was easier…

    Nathan Gelderloos -

  2. iYV6ba1pdpeMSb2X
    iYV6ba1pdpeMSb2X
    gVYDsAImqSvIdH5t
    • Drücke nach oben in die Löcher hinein, bis sich die Befestigungsstifte lösen.

    • Entferne die beiden Stifte mit einer Pinzette.

  3. H2cHqYkHqackb2CH
    • Nun sollte das alte Armband frei sein.

    • Baue dann das neue Armband ein.

  4. S3W2H3WyphXWREQE
    • Entferne die vier Torx T5 Schrauben von der Rückseite der Uhr.

  5. MdOK3GRKikEVo5cV
    MdOK3GRKikEVo5cV
    ktDvaYPiivYEFmwl
    • Entferne vorsichtig die Rückseite.

  6. A6kLpNsGciNNx13G
    A6kLpNsGciNNx13G
    UlUxWVZCDapZZbAL
    • Entferne behutsam mit einer Pinzette den goldenen Kontakt vom Akku.

    • Nimm ein Öffnungswerkzeug aus Kunststoff und entferne den Akku.

    this shows how to take the battery out; what about replacing it nd securign the ‘electricity leads’ of the new battery to the watch?

    Yonatan G -

    Thanks, very clear straight forward steps

    mohamed elmosalamy -

    this shows how to take the battery out; what about replacing it nd securign the ‘electricity leads’ of the new battery to the watch?

    même remaque que jonathan

    pas assez de précision sur la remise en place des connecteur de la nouvelle batterie

    François Collet -

    Bonjour François, as tu réussi à remonter la batterie?

    Thierry Grandjean -

    Very strange you haven't completed the procedure.

    John Kirk -

    It says 'To reassemble your device, follow these instructions in reverse order' How difficult is that? So, put battery in, carefully fold contacts back, etc, etc....if that is not obvious, then please do not attempt this at all.

    Mark van der Giezen -

Abschluss

Um dein Gerät wieder zusammenzubauen, folge den Schritten in umgekehrter Reihenfolge.

Nicholas Sanders

Mitglied seit: 28/09/17

531 Reputation

25 Kommentare

Hello, thanks for the details !

The most tricky part: find the right spare part. I can’t find a replacement battery that could fit the original dimensions with reasonnable capacity.

Do you have any lead?

Vincent -

In case if anyone is still looking for the spare part I have just replaced my M400 battery with this one: https://www.aliexpress.com/item/10050045...
Replacement instructions were detailed enough to get my watch to work again.

Roman -

Bonjour

Pourriez-vous m’indiquer ou je peux acheter une batterie compatible ou originale

Merci à vous

ducellier -

where can i buy a batery for my polar m400? Link please. Thanks

lsmi_21 -

Once the battery is changed, the M400 does not work. Do you have to press any combination of keys?

lojobis -

You have to connect charging cable.

Xavier Gernaey -

I have made the process with the same battery and once finished it does not work anymore, is there any combination of keys to start it?

I recommend not doing it until you know it

lojobis -

After the procedure, just plug the USB to your computer with Polar Flow running and it will restart your watch!

Keven Bronsard -

I read somewhere it won't start unless you plug the charger. Hope this helps.

Léo Beaudoin -

https://www.allsystem.cz/

I bought a connector USB there… Maybe can be interesting for someone else…

manuel caudera -

I had same problem =

“I have made the process with the same battery and once finished it does not work anymore, is there any combination of keys to start it?

I recommend not doing it until you know it

lojobis - 23-02-2019”

fabio andrade -

After the procedure, just plug the USB to your computer with Polar Flow running and it will restart your watch!!!

Keven Bronsard -

Could the issue be no electrical contact with the battery when reassembling? The contacts don’t seem easy

LeftoverScrew -

Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?

Olivier Grand -

After the procedure, just plug the USB to your computer with Polar Flow running and it will restart your watch…

Keven Bronsard -

Where could i buy the micro usb connection for the M400?

floydian1973 -

where I can buy the battery?

pierodire -

The Polar M400 original battery is an EVE 3.7V 190mAh lipo battery cell (352826) with dimensions: 3.5mm (thickness) x 28mm (height) x 26mm (width). Unfortunately this battery is discontinued and is very difficult to get. However, you can use this instead:

352525 160 mAh cell for 6€

It has 30mAH less but the dimensions fit (3.5mm x 25mm x 25mm) . Since it comes with leads, the only thing you would have to do to adapt it is either expose the connectors, or connect these leads with the PCB connectors.

joseacr2000 -

Oppure questa 190mAh 3.8V

https://it.aliexpress.com/item/400061109... 9359-4111-b6ad-6391504d1b12 & ws_ab_test = searchweb0_0, searchweb201602_1, searchweb201603_55

alaska.m -

Ciao, vedo che sei italiano. Sei riuscito a rimpiazzare la batteria da te indicata senza problemi? Mi consigli di provarla?

elia occhiuzzi -

Bonjour Merci pour les tutos

J’ai une polar M 400 et j’ai changé le connecteur USB .Je voudrais savoir comment on referme la connection sur la nappe du connecteur ?

Cordialement AM

Andre Matrat -

Hi. I had changed the original baterry for this

https://nl.aliexpress.com/item/400061109...

190 Mah 3.8V Batterij Core Voor Polar M430 M400 Gps Sport Horloge Nieuwe Li-Polymeer Oplaadbare Accumulator Vervanging + Spoor Code

but my flash light in my Polar watch doesen’t worked give no lights more.

I made somthing wrong maybe? Can sombody help me?

Thanks

Lionel -

I have made the process with the same battery and once finished it does not work anymore. also connecting to polar flow does not makes any difference

bowoo king -

Battery measurement give me 4V

bowoo king -

Depending on the model of your Polar device you can either change the battery yourself or you need to have it changed by a Polar-authorized service center that only uses Polar-approved components. With every battery change, Polar performs a full periodic and water resistance check.

https://support.polar.com/us-en/support/...

Harry C -