RDY Y70 001 RAM Replacement

Geschrieben von: Louis Ho
  • Kommentare: 0
RDY Y70 001 RAM Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

15 - 25 Minuten

Einleitung

Is your iBUYPOWER RDY Y70 001 suffering from faulty RAM? Then look no further. This guide will teach you how to replace faulty RAM, or to add current RAM for the to your iBUYPOWER RDY Y70 001. Make sure to turn your PC'S power off before starting!

  1. hcuJTqUVGSbhwDH2
    hcuJTqUVGSbhwDH2
    dgCDQQjpxdyM55Qd
    KZ6rZauvQUQASkj6

    • Unplug Power

    • Make sure the PC is not powered by unplugging it

  2. Xrs1TAJfiVjAFRbE
    Xrs1TAJfiVjAFRbE
    evfHLE3QWjysmYHU

    • Take the screws off using an Allen key

    • Pull the window off the PC

  3. 6PiPorXqRfqES1rh
    6PiPorXqRfqES1rh
    6OkTOdWTjnIIicSL
    nahTg1QkTU1MZJXJ

    • Remove current RAM

    • Push down on the clips holding down the current RAM

    • Carefully pull the RAM sticks out

  4. 1RhmMtwocSBxYBue
    1RhmMtwocSBxYBue
    DSHAVoFAUF4WVXKp

    • Install new RAM

    • Carefully put the new RAM sticks facing the right direction and in the correct slots.

    • Carefully apply pressure downwards on the RAM stick until the clip locks itself.

    • Make sure the clip is closed.

  5. HuneMWFYsTYiQYrR
    HuneMWFYsTYiQYrR
    lAky1VJtl2mJ6JNJ
    YWwDBFvIjMkEoBxE

    • Put the window back onto the PC case

    • Screw the window onto the PC case

    • Check your system settings to make sure the RAM is installed properly

Abschluss

Hopefully your RDY Y70 001 is running smoother and faster than it was before.

Tinte & Feder

Louis Ho

Mitglied seit: 05/07/24

148 Reputation

0 Kommentare